Universal Girder Lifting Beam Clamp 3T - 10T (Vertical Lift Hoist Horizontal Pulling RSJ)
Universal Girder Lifting Beam Clamp 3T - 10T (Vertical Lift Hoist Horizontal Pulling RSJ)
Couldn't load pickup availability
The most versatile beam clamps you could possibly own. Reliable in all hoisting situations.
Universal Girder Clamps 3T to 10T
Our Universal Lifting Beam Clamps are incredibly versatile pieces of equipment used for hoisting equipment; however not only can they be used for conventional lifting, but they can also be used for horizontal pulling too. Designed for tackling vertical and side loads with equal supremacy these Lifting Clamps operate at their maximum capacity no matter the angle of use.
These Girder Lifting Clamps allow you to create a semi-permanent anchor point on wide range of steel girder beams both vertically and horizontally making them the perfect choice for both lifting and pulling applications. This impressive piece of equipment eliminates the need for spreader beams, making them an extremely cost-effective option.
3 Ton, 5 Ton and 10 Ton capacities are available.
| Capacity (Ton) | A(MM) | B(MM) | C(MM) | D(MM) | E(MM) | F(MM) | G(MM) | H(MM) | J(MM) | K(MM) | L(MM) | Weight (kg) |
| 3 | 387 | 60 | 70 | 57 | 32 | 235 | 100 | 25 | 28 | 20 | 125-204 | 12.5 |
| 5 | 527 | 70 | 74 | 60 | 32 | 270 | 120 | 25 | 38 | 24 | 125-305 | 20.5 |
| 10 | 527 | 70 | 74 | 60 | 32 | 278 | 120 | 25 | 38 | 24 | 125-305 | 26.5 |
Conforms to British Standard EN13155 :2003+A2 :2009, with a 4:1 Factor of Safety.
Do not exceed the working load limits listed above. Do not use this equipment for lifting flat plate sections.

My Account
My Basket